Browsing ISGSR 2011 - Geotechnical Safety and Risk by Title

Now showing items 1-20 of 75

A Comparative Study of Pile Design Using Eurocode 7 and RBDE

Wang, Jun; Cao, Y. (2011)
A comparison of Random Set and Point Estimate Methods in Finite Element Analysis of Tunnel Excavation

Schweiger, Helmut F.; Nasekhian, A.; Marcher, T. (2011)
A Consistent Failure Model for Probabilistic Analysis of Shallow Foundations

Kisse, A. (2011)
A GIS-based approach for mapping hazardous areas due to geological slope processes: case study for Jesenice municipality in Slovenia

Pavlic, Matevz Uros; Pranzik, Blaz (2011)
A Guide to Processing Rock-fall Hazard from Field Data

Bauer, Markus; Neumann, Peter (2011)
A probabilistic approach to risk assessment of slow slope movements

Ranalli, Marco; Gottardi, G.; Medina-Cetina, Z.; Nadim, F. (2011)
A procedure for determining the characteristic value of a geotechnical parameter

Bond, Andrew (2011)
A stochastic approach to rainfall-induced slope failure

Arnold, Patrick; Hicks, Michael (2011)
Analysis of rock burst in critical section of second part of Karaj-Tehran Water Supply Tunnel

Khanlari, Gholamreza; Ghaderi-Meybodi, R. (2011)
Application of reliability based design (RBD) to Eurocode 7

Hara, Takashi; Honjo, Yusuke; Otake, Yu; Moriguchi, Shuji (2011)
Assessment of Levee Breaching Risks to the Pearl River Delta

Zhang, Limin; Xu, Yao; Liu, Y. (2011)
Assessment of reliability and inherent risk levels of geogrid reinforced soil structures

Bussert, Florian (2011)
Automated Engineering in Levee Risk Management

Knoeff, J. G.; Vastenburg, Erik (2011)
Calibration of Piping Assessment Models in the Netherlands

Cruz, Juliana Lopez de la; Calle, E. O. F.; Schweckendiek, Timo (2011)
Case Study On The Assessment Of Sinkhole Risk For The Development Of Infrastructure Over Karstic Ground

Sartain, Nicholas; Mian, J.; O’Riordan, N.; Storry, R. (2011)
Causes of major geotechnical disasters

Baars, Stefan van (2011)
Challenges in Geotechnical Reliability Based Design

Honjo, Yusuke (2011)
Determination of characteristic soil values by statistical methods

Pohl, Carsten (2011)
Determining design loads – comparative calculations between DIN 1054 and EC7-1

Ziegler, M.; Tafur Bances, Elias Manuel (2011)
Developing a LRFD Procedure for Bridge Shallow Foundations

Lesny, Kerstin; Paikowsky, Samuel (2011)

DINI - Zertifikat für Open-Access-Publikationsdienste 2019